GARAGE AND AUTOMOTIVE EQUIPMENT

A - AB BOTTLE JACKS

AF - HIGH LIFT HYDRAULIC TRANSMISSION JACKS

AF - HIGH LIFT HYDRAULIC TRANSMISSION JACKS

image142


  • From 2 to 50 Tn.
  • Up to 30Tn 'A' Models are single stage with screw extension.
  • 'AB' versions are telescopic with two hydraulic extensions.
  • All models with safety relief valve.
  • Forged material base.
  • Supplied with zinc coated handle and individual cardboard box.
  • Bottle jacks will operate horizontally, provided that the pump element is at the lowest point.

CONTACT CRATOS

AF - HIGH LIFT HYDRAULIC TRANSMISSION JACKS

AF - HIGH LIFT HYDRAULIC TRANSMISSION JACKS

AF - HIGH LIFT HYDRAULIC TRANSMISSION JACKS

image143

  • From  300 to 1.500 kg lifting capacity.
  • Hand operated release valve.
  • Chrome plated piston.
  • 4 castor wheels for easy manoeuvrability.
  • Foot operated pump keeps hands free.
  • Load saddle swivels to enable-all direction operation.
  • Packed in strong cardboard box.
  • An adaptable head allows a variety of jobs to be undertaken safely.

CONTACT CRATOS

B- TROLLEY JACKS

AF - HIGH LIFT HYDRAULIC TRANSMISSION JACKS

DLR - PORTABLE HYDRAULIC CRANES

image144


  • From 2 to 20 Tn.
  • Two wide wheels to support the load and castor wheels for easier manoeuvrability.
  • Safety valve avoids overpressure.
  • Handle features integral safety release mechanism to prevent accidental release.
  • Foot pedal to provide quick approach.
  • Rugged frame construction for heavy-duty operation.
  • End of stroke limiting valve.
  • Safe and precise control during lifting or lowering operations.

CONTACT CRATOS

DLR - PORTABLE HYDRAULIC CRANES

F - PORTABLE HYDRAULIC LIFTING TABLES

DLR - PORTABLE HYDRAULIC CRANES

image145

  • From 650 to 2.000 kg lifting capacity.
  • Heavy duty wheels and swivel rear castor for easy movement.
  • Exceptionally versatile due to their compact dimensions when folded up.
  • Fitted with a safety relief valve to prevent overloading.
  • All models are fitted with an extendable jib to increase reach.
  • Special lowering valve in all models for safer and better control of descent. If the knob is released accidentally, the arm stops.

CONTACT CRATOS

F - PORTABLE HYDRAULIC LIFTING TABLES

F - PORTABLE HYDRAULIC LIFTING TABLES

F - PORTABLE HYDRAULIC LIFTING TABLES

image146

  • Single lift models, 650 kg, 1.500 kg and 2.500 kg capacity and high of 645mm and 880mm.
  • Operating handle is used to lift the load.
  • Special lowering valve means that the process is safe and controlled. Overload safety relief valve.
  • Heavy duty swivel castors.
  • “T" operating handle facilitates easier operation.
  • The table can be locked at different heights with safety pins.
  • Strong steel platform.

CONTACT CRATOS

HN - AIR HYDRAULIC SERVICE JACKS

F - PORTABLE HYDRAULIC LIFTING TABLES

F - PORTABLE HYDRAULIC LIFTING TABLES

image147

  • From 30 to 80 Tn.
  • Telescopic models with two and three stages.
  • Operated by an air/hydraulic pump. Air pressure required: 8 to12 bar.
  • Ram return is automatic. Constant and controlled speed under load, can be increased without load.
  • Check valves guarantee load holding, even if an air or oil pipe is accidentally broken.
  • Equipped with an overpressure safety valve as protection against overloading.
  • Three-position handle can be lowered to place the jack under the load.
  • A hardened serrated load saddle and extension pieces of 70 and 120 mm are supplied as standard.
  • Easy to operate, with the control located on the end of handle.

CONTACT CRATOS

HL - HIGH TONNAGE AIR HYDRAULIC SERVICE JACKS

HL - HIGH TONNAGE AIR HYDRAULIC SERVICE JACKS

HL - HIGH TONNAGE AIR HYDRAULIC SERVICE JACKS

image148

MINING JACKS


  • From 60 to 150 Tn.
  • Used for mining and other heavy duty vehicle maintenance applications.
  • Models with one stage and telescopic with two and three stages.
  • Operated by an air/hydraulic pump. Air pressure required: 8 to12 bar.
  • Air inlet port: 1/2" BSP.
  • Dual descent valve for greater control.
  • Fitted with self sealing pneumatic tyres for easy manoeuvrability.
  • Special hooks for transport.
  • Ram return is automatic. Constant and controlled speed under load, can be increased without load.
  • Check valves garantee load holding, even if an air or oil pipe is accidentally broken.
  • Equipped with an overpressure safety valve as protection against overloading.
  • Three-position handle can be lowered to place the jack under the load.
  • Easy to operate, with the control located on the end of handle.
  • Wide range of optional accessories: Remote pendant, manual emergency pump, safety load blocks, safety block holder, safety blocks kit, extensions and extension holder.

CONTACT CRATOS

VA - VB HYDRAULIC PIPE BENDERS

HL - HIGH TONNAGE AIR HYDRAULIC SERVICE JACKS

HL - HIGH TONNAGE AIR HYDRAULIC SERVICE JACKS

image149


  • Suitable for carrying out bending operations with plumbing pipes, DIN 2440 and DIN 2441.
  • Pipe bending capacities of up to 2” and 3”.
  • Maximum bending angle: 180º.
  • Models: Built-in pump (VA, VB).
  • Equipped with a safety relief valve to prevent overpressure.
  • Delivered in storage boxes.
  • VB1527 model is equipped with a tripod stand.

CONTACT CRATOS

CA - HYDRAULIC MAINTENANCE KITS

HL - HIGH TONNAGE AIR HYDRAULIC SERVICE JACKS

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

image150


  • Maintenance Set CA1014 made of a series of attachments that combined with the pump, cylinder and hose, enable configuration of specific tools designed for various operations such as pushing, separating, joining, lifting, compressing, stretching and fixing.
  • 10 Tn model available.
  • Supplied in a storage/transport case.
  • The cylinder provides the indicated nominal force, but as some attachments can induce cylinder side loading, the unit can only be used at 50% of its capacity, at a MAXIMUM WORKING PRESSURE of 350 bar.
  • Pulling cylinder T00514, Pressure Gauge AV10006 and Pressure adaptor AZ1502 available as option.

CONTACT CRATOS

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

image151

  • Extremely sturdy frames, made from welded steel profiles, available as bench mount (EC series) and floor mounted H-Frame models.
  • Models are available powered by hand pump, air/hydraulic pump or electric/hydraulic pump. CE versions are fitted with remote motor control.
  • Table height is adjustable on floor mounted models, manually on 30 Tn, winch on 60 Tn and 120 Tn models and hydraulically from the main ram on 250 Tn models.
  • Vee blocks and a pressure gauge reading in tons are supplied as standard on all models.
  • The hydraulic cylinder on the ECM and ECZ bench presses can be easily be removed and used in other applications.
  • On the 30 Tn EM and EZ presses, the hydraulic cylinder is equipped with a screw extension designed to minimise the pumping action required.
  • The EM models incorporate a two-speed hand pump for quick approach of the piston to the work piece.

CONTACT CRATOS

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

image152

EM03012 Floor Mount Press


CONTACT CRATOS

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

EC - EE - EM - EZ HYDRAULIC SHOP PRESSES

image153

ECM01113 Bench Mount Press 


CONTACT CRATOS