INDUSTRIAL TOOLS

CK - HYDRAULIC CHAIN CUTTERS

CK - HYDRAULIC CHAIN CUTTERS

CK - HYDRAULIC CHAIN CUTTERS

image86

  • Maximum working pressure 700 bar.
  • CK0016 model includes an integrated hand pump. Other models are powered by an external hand, air, electric, or petrol pump.
  • CK0216, CK0230 and CK0250 models are double acting, for fast retraction.
  • All models are provided with a male ball quick coupler AZ3321.
  • Available battery powered portable pump HAB1102.

CONTACT CRATOS

CC - HYDRAULIC CABLE CUTTERS

CK - HYDRAULIC CHAIN CUTTERS

CK - HYDRAULIC CHAIN CUTTERS

image87

  • Maximum working pressure 700 bar.
  • Single acting models have spring return.
  • CC0260 model is double acting and is especially recommended for sub-sea applications. Optionally we
    can supply special seal kits for deep water operation.
  • CC0018, CC0040 and CC0075 models are autonomous, with integratedl pump to enable working in difficult positions. These tools are supplied with a relief valve to prevent overload.
  • Plastic carry box included for easy transport and tool protection.
  • Rotating heads for easy operation.
  • Installing replacement blades is a simple operation.

CONTACT CRATOS

CN - HYDRAULIC NUT-SPLITTERS

CK - HYDRAULIC CHAIN CUTTERS

CN - HYDRAULIC NUT-SPLITTERS

image88

  • Designed to work in two different ways, depending on the material grade of the nuts, either cutting or deforming them.
  • CN0024 Model with integrated pump, provides easier access for situations with limited access.
  • CN0224 Model especially designed to cut the nuts of the guard rails.
  • CN0324 Model, open design especially suitable for those situations when the normal design is not the best solution.
  • Plastic carry box included for easy transport and tool protection.
  • Relief valve on CN0024 to avoid overloading.
  • All models are provided with a male ball quick coupler AZ3321.
  • Caution: The tool cuts materials with a resistance lower than 500 N/mm² and deforms all materials up to a resistance of 1.250 N/mm².

CONTACT CRATOS

FU - HYDRAULIC PULLERS

FA - SELF-CENTERING PULLERS

CN - HYDRAULIC NUT-SPLITTERS

image89

  • Wide range of models from 5 to 50 Tn suitable for most maintenance pulling applications.
  • Manufactured in high quality forged steel.
  • FU Universal Hydraulic Puller includes the hydraulic components and all mechanical components:
    • Hydraulic part: Includes cylinder, pump, hose, pressure gauge, gauge adaptor, male coupling and hollow saddle.
    • Mechanic part: Includes 2 Jaws puller (FX), 3 Jaws puller (FV) and Complete Cross Bearing puller (FZ) that includes: Simple Cross Bearing puller with long and short extension pieces (FT), Bearing Cup puller (FI) and Bearing puller (FR).
  • 2 jaw puller (FX), 3 jaw puller (FV), simple cross bearing puller (FT) and complete cross bearing puller (FZ) include hydraulic componentes and mechanical components.
  • The universal puller set FU, the jaw pullers, FX and FV, and the complete cross bearing puller FZ are delivered in a strong wooden box for ease of transport and storage.

CONTACT CRATOS

FA - SELF-CENTERING PULLERS

FA - SELF-CENTERING PULLERS

FA - SELF-CENTERING PULLERS

image90

  • Self-centering Puller (FA) available in 10, 20, 30 and 50 Tn.
  • Ergonomic, self centering of the jaws provides easy setups on pulling jobs.
  • The large jaw opening allows bigger diameter reach and spread which makes the puller more versatile.
  • Self-centering Puller includes the hydraulic components and mechanical components.

CONTACT CRATOS

CY - SPREADER CYLINDERS

FA - SELF-CENTERING PULLERS

FA - SELF-CENTERING PULLERS

image91

  • CY series spreaders are used for many tasks in confined access situations.
  • CY0109G is used for very confined situations and CY0122 is used for greater spreading distance.
  • CY0109G and CY0122 models are supplied with AZ3140 high flow female couplers.
  • Also available CY0109 and CY0122P fitted with AZ3240 low flow female coupler.

CONTACT CRATOS

CY - WEDGE SPREADERS

CT-CX-C DYNAMOMETERS & LOAD CELLS

BS - FLANGE SPREADERS

image92

  • 15 ton capacity wedge spreader.
  • Lightweight and ergonomic tool.
  • Specially designed for pipe and flange repair and maintenance. Can be used also for seal replacement, removing elbows or heavy equipment maintenance.
  • Required access gap of only 5 mm.
  • Suitable for harsh offshore environment due to corrosion protection.
  • It is recommended to be used in pairs.
  • Easy and quick maintenance.
  • Options: Aluminium Safety block CY15B; Handel CY15H;     Kit CY1501S, with pump and 2 wedge spreaders, safety blocks, hoses, couplers, gauges and manifold.

CONTACT CRATOS

BS - FLANGE SPREADERS

CT-CX-C DYNAMOMETERS & LOAD CELLS

BS - FLANGE SPREADERS

image93

  • 5 and 10 Tn models available.
  • Used for safely opening pipe flanges.
  • Adjustable jaw widths from 70 to 226 mm.
  • Ergonomic and lightweight tools.
  • Can be operated individually or in pairs.

CONTACT CRATOS

CT-CX-C DYNAMOMETERS & LOAD CELLS

CT-CX-C DYNAMOMETERS & LOAD CELLS

CT-CX-C DYNAMOMETERS & LOAD CELLS

image94

  • Accuracy ± 4%
  • Dynamometers available from 5 to 100 Tn. Load cells available from 5 to 150 Tn. Contact us for other capacities.
  • Includes glycerine filled gauge with maximum indicating pointer.

CT DYNAMOMETERS


  • Measure tension loads.
  • Can be used for measuring tension loads in cables, tensile testing and can be used as a weighing device.

C LOAD CELLS


CONTACT CRATOS

AU - HYDRAULIC TOE JACKS

PH - PORTABLE HYDRAULIC PUNCHNG HEADS

CT-CX-C DYNAMOMETERS & LOAD CELLS

image95


  • Compact and lightweight jacks for easy transportation.
  • Load can be lifted with either toe or main plunger.
  • Fitted with relief valve to prevent overloading.
  • Excellent for lifting load in reduced access situations.
  • Pumping handle included.

CONTACT CRATOS

PH - PORTABLE HYDRAULIC PUNCHNG HEADS

PH - PORTABLE HYDRAULIC PUNCHNG HEADS

PH - PORTABLE HYDRAULIC PUNCHNG HEADS

image96

  • From 15 to 45 Tn.
  • Direct punching hydraulic machine designed for round, square or oblong puncher holes in mild steel sheets.
  • Lightweight, easy transport and handling, especially in confined spaces.
  • Provided with a male ball quick coupler AZ3321.
  • Used in electric conducting towers, metallic structures, bridges, etc.
  • For punches on all type of plates I-L-T. Depending on material, indicate if 14%, 8% inclination punchers are needed.
  • Material thickness depends on its hardness and should not exceed holes diameter.
  • Puncher and die are not included. Order them indicating the diameter required.
  • Material maximum strength: 37 kg/mm².
  • Working pressure: 700 bar.

CONTACT CRATOS

AA - LIFTING CUSHIONS

PH - PORTABLE HYDRAULIC PUNCHNG HEADS

PH - PORTABLE HYDRAULIC PUNCHNG HEADS

image97


  • Pneumatic cushion made of friction resistant material.
  • Collapsed height of 28 mm.
  • Working pressure: 8 bar.
  • Pneumatic male coupler included.
  • Excellent for lifting loads at restricted spaces.
  • Often used in rescue operations, rubble lifting in collapses and other lifting applications with very limited access.
  • Use two lifting cushions to increase lifting height.
  • Hoses, couplers and control valves are available, see chart.

CONTACT CRATOS